+0
I simply couldn't understand the following underlined information. Could anyone be kind enough to tell me? Thanks!

Display Select: 1. 36 DEG C

2. RUN COMP TO CK

Set: 1. AUTO S/S OFF

2. SEQUENCE OFF

3.REMOTE S/S OFF

4. LOAD DELAY 2 S

5.LEAD

6. OFFSET 0 KG

7. LOW AMBIENT OFF
Comments  
These seem to be technical references. Unless you give the exact places where you come across, it would be difficult to find the answers. However, this is what I understand

1. 36 DEG C - 36 degree centrigrade

2. RUN COMP TO CK- Run a computer disk check

3. AUTO S/S off : - Automatic System Switching is off

4. SEQ. OFF - Continuing of program is not selected

5. Remote s/s off: Remote system switching is off

6. Load delay 2 s : Load delay due to the power fluctuations could be 2 seconds

7. Lead is usually used in using CD rom or CD writing devices

8. Low ambiance off: The sound effect is turned off
AnonymousThese seem to be technical references. Unless you give the exact places where you come across, it would be difficult to find the answers. However, this is what I understand

1. 36 DEG C - 36 degree centrigrade

2. RUN COMP TO CK- Run a computer disk check

3. AUTO S/S off : - Automatic System Switching is off

4. SEQ. OFF - Continuing of program is not selected

5. Remote s/s off: Remote system switching is off

6. Load delay 2 s : Load delay due to the power fluctuations could be 2 seconds

7. Lead is usually used in using CD rom or CD writing devices

8. Low ambiance off: The sound effect is turned off

Thank you very much. You've been very helpful.